how to find points of inflection

Download Article

Download Article

In calculus, an inflection point is a point on a curve where the slope changes sign.^[1] It is used in various disciplines, including engineering, economics, and statistics, to determine fundamental shifts in data. If you remember what concavity is and how it affects inflection, you'll be able to find the inflection points of the curve with a few simple equations.

1. 1

   Differentiate between concave up and concave down. To understand inflection points, you need to distinguish between these two. They're easy to distinguish based on their names.^[2]

   • A concave down function is a function where no line segment that joins 2 points on its graph ever goes above the graph. Intuitively, the graph is shaped like a hill.
   • A concave up function, on the other hand, is a function where no line segment that joins 2 points on its graph ever goes below the graph. It is shaped like a U.
   • In the graph above, the red curve is concave up, while the green curve is concave down.
   • Functions in general have both concave up and concave down intervals. Inflection points exist when a function changes concavity.

2. 2

   Identify the roots of a function. A root of a function is the point where the function equals zero. In the graph above, we can see that the roots of the green parabola are at ${\displaystyle x=-1}$ and ${\displaystyle x=3.}$ These are the points at which the function intersects the x-axis.^[3]

   • A function can also have more than 1 root.

3. 3

   Find inflection where the function changes concavity. Remember how there's a difference between concave up and concave down? The area where the concaves switch is called the "inflection point," which is what you're trying to find.^[4]

   • It's easy to see this point on a graph.

1. 1

   Differentiate. Before you can find an inflection point, you'll need to find derivatives of your function. The derivatives of the basic functions can be found in any calculus text; you'll need to learn them before you can move on to more complex tasks.^[5] First derivatives are denoted as ${\displaystyle f^{\prime }(x)}$ or ${\displaystyle {\frac {\mathrm {d} f}{\mathrm {d} x}}.}$

2. 2

3. 3

   Set the second derivative equal to 0, and solve the resulting equation. Your answer will be a possible inflection point. ^[6]

   • ${\displaystyle {\begin{aligned}6x&=0\\x&=0\end{aligned}}}$

1. 1

   Check if the second derivative changes sign at the candidate point. If the sign of the second derivative changes as you pass through the candidate inflection point, then there exists an inflection point. If the sign does not change, then there exists no inflection point.^[7]

2. 2

   Substitute it back into the original function. ^[8]

   • ${\displaystyle f(0)=(0)^{3}+2(0)-1=-1.}$

3. 3

   Evaluate the function to find the inflection point. The coordinate of the inflection point is denoted as ${\displaystyle (x,f(x)).}$ In this case, ${\displaystyle (0,-1),}$ as graphed above. Therefore, those numbers are the inflection point.^[9]

1. 1

   Check the candidates. Often, when ${\displaystyle x=0,}$ it is easy to assume that means there are no inflection points. However, when ${\displaystyle x=0,}$ there is still an inflection point. Remember, 0 can be graphed, so if you get 0 as your answer, it means there is 1 inflection point.^[10]

2. 2

   Include points where the derivative is undefined. When you solve for an inflection point, you have to look for instances when the second derivative is 0 and when the second derivative is undefined. If you only look for ones where the second derivative is 0, chances are, you'll get the wrong answer.^[11]

3. 3

   Analyze the second derivative, not the first one. When you're finding inflection points, you should always be considering the second derivative. If you consider the first one, your answer will give you extremum points instead.^[12]

   • For example, if your possible inflection points are ${\displaystyle x=-1}$ and ${\displaystyle x=7,}$ you would test the x values at ${\displaystyle (-infinity,-1),(-1,7),}$ and ${\displaystyle (7,infinity).}$ This would tell you that your second derivative has inflection points at both ${\displaystyle x=-1}$ AND ${\displaystyle x=7.}$

1. 1

   Head to your "Plots." On most scientific calculators, this will involve hitting the diamond or the second button, then clicking F1. This should take you to your Y plots where you can enter up to 7 values.^[13]

   • This is true on both the TI-84 and the TI-89, but it may not be the exact same on older models.

2. 2

   Enter the function into y1. Clear out any remaining functions you had in your y plots, then type in the function after the equal sign into your calculator. Remember to keep any parentheses involved in the function so your answer is correct.^[14]

   • For example, the function might be ${\displaystyle y1=x^{3}-9/2x^{2}-12x+3}$

3. 3

   Click "graph." On most calculators, this will be "diamond" or "second," then F3. If you have to adjust your window on the calculator, press "diamond" or "second," then F2, then select "standard zoom."^[15]

   • Don't worry if your screen doesn't show the whole graph just yet—you'll be able to adjust it.

4. 4

   Adjust the window until you can see the whole graph. When you open up the graphing window, you might not be able to see the entire curve of your graph. If that's the case, click the "diamond" or "second" button, then open up F2 for zoom again. You can increase and decrease your minimum and maximum axis to figure out where your graph will fit inside of the window.^[16]

   • You might have to go back and adjust this a few times, as it can be hard to figure out where your graph is exactly.

5. 5

   Click "Math," then "Inflection." Hit the "diamond" or "second" button, then select F5 to open up "Math." In the dropdown menu, select the option that says "Inflection."^[17]

   • This is—you guessed it—how to tell your calculator to calculate inflection points.

6. 6

   Place the cursor on the lower and upper bound of the inflection. Your calculator will give you a message saying "Lower?" Move the arrows on your calculator until the cursor is to the left of the inflection point (you'll have to know vaguely where it is on the graph). Then, your calculator will ask "Upper?" Move your cursor so it's to the right of the inflection point, then hit "Enter."^[18]

   • This is how you'll get your calculator to make a guess as to where the inflection point is. Now you have your answer!

Add New Question

• Question

  What if the second derivative is a constant? How do I find the inflection point?

  

  Inflection points are where the second derivative changes sign. If it is constant, it never changes sign, so there exists no inflection point for the function.

• Question

  Can the first derivative become zero at an inflection point?

  

  Orangejews

  Community Answer

  Yes, for example x^3. It changes concavity at x=0, and the first derivative is 0 there.

• Question

  Find the value of x at which maximum and minimum values of y and points of inflection occur on the curve y = 12lnx+x^2-10x.

  

  Take the derivative and set it equal to zero, then solve. These are the candidate extrema. Take the second derivative and plug in your results. If it's positive, it's a min; if it's negative, it's a max. Set the second derivative to 0 and solve to find candidate inflection points. We can rule one of them out because of domain restrictions (ln x). Confirm the other by plugging in values around it and checking the sign of the second derivative.

• Question

  Why isn't y^2=x a function? Can I say that x is function of y? How do I determine the dependent and independent variable in a relation or function?

  

  For that equation, it is correct to say x is a function of y, but y is not a function of x. A common notational convention is to use x for an independent variable and y for a dependent variable, and for function to mean that the dependent variable is uniquely determined by the independent variable. Saying "y^2 = x is not a function" is true if the author implicitly assumed those conventions, but it would have been better to state them explicitly to avoid any confusion.

• Question

  Why does 6x = 0 become '0' and not x = -6?

  

  Multiplying 6 by -6 will give you a result of -36, not 0. Multiply a number by 0 to achieve a result of 0.

• Question

  Why do we set the both first and second derivative equal to zero to find the points?

  

  You only set the second derivative to zero. This is because an inflection point is where a graph changes from being concave to convex or vice versa. That change will be reflected in the curvature changing signs, or the second derivative changing signs. When the second derivative changes from positive to negative or negative to positive, it will at one point in time be zero. That point where it is zero is exactly when it starts to change.

• Question

  If my second derivative is 2/x, does it have an inflection point?

  

  This depends on the critical numbers, ascertained from the first derivative. You test those critical numbers in the second derivative, and if you have any points where it goes from one concavity before to another after, then you have a point of inflection.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

• You can also take the third derivative of a function, set that to zero, and find the inflection points that way. However, taking such derivatives with more complicated expressions is often not desirable.

• All linear functions have no inflection points. This is because linear functions do not change slope (the entire graph has the same slope), so there is no point at which the slope changes.

Thanks for submitting a tip for review!

About This Article

Article SummaryX

To find inflection points, start by differentiating your function to find the derivatives. Then, find the second derivative, or the derivative of the derivative, by differentiating again. To locate a possible inflection point, set the second derivative equal to zero, and solve the equation. Finally, find the inflection point by checking if the second derivative changes sign at the candidate point, and substitute back into the original function. For more tips on finding inflection points, like understanding concave up and down functions, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 260,136 times.

Did this article help you?

how to find points of inflection

Source: https://www.wikihow.com/Find-Inflection-Points

Posted by: martinsommill1983.blogspot.com

Share this post